═══════════Frequently Asked Question═══════════

Author: KRENKI

Considering that a suspension bolt-on for my dritschpak would have cost around 50-60kr, it was decided to go the well-trodden path and install wheels from S13! Using some simple tricks, I spent a couple of free evenings implementing this in my steroid monster.

Lower cups with threads were pre-machined and welded to the original hubs by a good welder at work.

I welded brake hose clamps, primed and painted them.

Bushings for the rear sway bar mounting points were machined since the diameters of mine and S13's differ significantly.

The rear bushings were modified by removing rubber dampers, enlarging the central hole, and drilling holes for sway bar bracket attachment.

Rear strut in place

Front strut in place, just need to figure out the stabilizer mounts upfront; solution found, will illustrate later)

Front strut in place, just need to figure out the stabilizer mounts upfront; solution found, will illustrate later)