════════════Frequently Asked Question════════════
Author on day 2:Nikolajzx81
Reason: topic
Hello everyone!
In the previous topic, I talked about the front stabilizer bar that was ordered and also mentioned ordering a rear stabilizer!

So we now have a Nissan Skyline ECR33 rear strut tower brace!
Of course, no modifications can be avoided here!
From the stabilizer, I cut off everything unnecessary, leaving only the bolt ears!
I ordered two rings from a machinist with dimensions Ф196х96х4мм

Marked holes on the rings using part of the cup that remained from the old shock absorber!

Then aligned the brace in the center and height to make templates for plates.
Then cut out 4 pieces from metal!

Afterwards, measure, tack-weld, and weld!

Then cleaned up and painted it!

Installed everything as required with a central bolt!
Can't really say about the sensations on the car since I haven't driven much with the brace or without it!
I would say the budget is quite modest
Stabilizer for 2300rub
Rings from the machinist for 400rub
Welding for 800rub
Total 3500rub